ISO Film processing equipment

1.Full automatic 2.Mold ejecting 3.Automatic mould opening device 4.Safe and convenient operation

1. General advantage

1.1. Automatic temperature and time controlsystem

1.2. High Mixing Performance

1.3. Uncompromising quality

1.4. Easy installation

2. Application:

The mill is used for rubber plasticating, mixing, warming and sheeting.

3. General design:

3.1. The mill consists mainly for rolls, frame, bearing, roll nip adjusting, screw, heating and cooling device, emergency stop, lubrication system and such sections as electrical controls and, etc.

3.2. The main electric motor arrives the front and rear rolls to rotate oppositely through reduar, driving geras and friction gears.

4. Features:

4.1. The rolls are made of chilled alloyed castiron. Their working surfaces are of high hardness and wear-resistant. The working temperature of the bored roll is controllable by steam, cooling water or oil that pass through them thus, to meet the requirements of milling process.

4.2. Roll nip adjustment is realized by hand or electricity which can obtain high accuracy and sensitivity.

 

 

Type		XK-150	XK-250	XK-300	XK-360	X(S)K-400	X(S)K-450	X(S)K-560
Working diameter of rolls (mm)		150	250	300	360	400	450	560
Working length of rolls (mm)		320	620	750	900	1000	1200	1530
Working linear speed of front roll(m/min)		8	15.1	15.1	16.25	18.65	24.5	27.7
Max gap (mm)		10	10	10	10	15	15	15
Capacity per.batch(kg)		1-2	10-15	15-20	20-25	18-35	25-50	50-65
Driving motor power(kw)		7.5	18.5	22	30	37	55	95
Overall dimension (mm)	L	1080	3400	3580	3940	4250	5200	6120
	W	796	1350	1550	1780	1850	2380	2280
	H	1415	1500	1695	1740	1870	1770	2000
Weight (kg)		1100	3500	5205	5670	7600	13000	22000

 

 

 

ISO Film processing equipment